| 1.
Trim |
| |
Chrome, P.Brass, Gold (real 24k gold), call
for availability on Satin or Brushed Nickel. We offer 16
color coordinated trims (the 16 colors are all that are
available to us) - The list is located on the back of the
Gold price guide. If the trim color is not listed, we can
not get the color, and a metal trim finish will have to
be purchased. The list of 16 colors do not apply to the
Hydro-Back system or the Hydro-Air Massage system options. |
| 2.
Fashion colors |
| |
Any solid color of acrylic that is not a standard
color requires an up-charge to the customer. The list of
standard colors is on the back of the Gold Price Guide.
Any color not listed on the price guide will require some
sort of an up-charge. We can provide any color of acrylic
manufactured, whether it is on our list or not. |
| 3.
Marble color |
| |
We will manufacture Marble acrylic colors.
There is an additional lead time and a call should be placed
to the factory to check availability of the color of marble. |
| 4.
Waste and Overflow |
| |
We offer a cable operated waste & overflow
for convenience to the customer. |
| 5.
Integral Tile Flange |
| |
This option is only available on models that
have it listed as an option. We will mold a tile flange
on three sides for an alcove installation (this is molded
when the tub shell is made - it is not attached later).
When ordering this option, right hand or left hand will
have to be specified on end drain models. For center drain
models, overflow side or opposite overflow side will have
to be specified for proper molding. |
| 6.
Solo-Touch |
| |
On/Off control with 20 minute timer, low water
shut off, and variable speed motor. The pump operates with
the touch of the logo - First function -Touch the logo once
and the motor comes on high, Second function - Touch and
hold the logo and the speed of the motor will change - just
release your touch when the desired speed is achieved, Third
function - Touch and hold the logo until the slowest speed
is reached and then release the logo (The massage mode will
operate by speeding up and slowing down). This option is
only available on 6 jet systems. The Solo-Touch can not
be purchased with the Lumbar Jet Package. |
| 7.
Mountain air switch |
| |
On/Off control with a 20 minute timer and
low water shut off. This on/off control operates with the
standard air switch. |
| 8.
Heater |
| |
Factory installed, in-line electric T-heater
with internal pressure switch. When the pump is running
with water in the whirlpool, the pressure switch is activated
to turn the heater on. When the pump is off, the heater
turns off. Separate 20Amp dedicated GFCI 110v circuit is
needed for the heater. |
| 9.
Mood Light |
| |
Mood light chromotherapy LED light that changes
by pushing a button. |
| 10.
Rotary Jet Option |
| |
Two insert cartridges that spin to provide
a circling massage. They can be interchanged with any of
the standard Colony jet cartridges. Only two Rotary inserts
can be used on a six jet system. Note: two rotary inserts
are included in the Lumbar Jet Package. |
|
|
